Hifax TRC 835P RXF BLK high melt flow, medium high flexural modulus, precolored, UV-stabilized, mineralfilled, paintable thermoplastic elastomeric olefin (TEO) resin has a very good balance of properties. It is typically used for automotive exterior trim applications.
Hifax TRC 835P RXF BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 38 g/10 min |
| Density (23 °C) | 1.03 g/cm³ |
| Flexural Modulus (23 °C) | 1700 MPa |
| Tensile Stress at Yield (23 °C) | 19.5 MPa |
| Tensile Strain at Yield (23 °C) | 8.0 % |
| Instrumented Dart Impact (-15 °C) | 26 J |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications